Availability: | |
---|---|
Quantity: | |
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device's temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
1) Standard: GB/75237-2004, Q/320281/PDWD-2008
2) Certification: ISO9001
3) OEM service offered
4) Material: Alloy 6063, 6061, etc.
Temper: T3, T4, T5, T6
5) Fabrication : 1. Milling; 2. Drilling; 3. Bending; 4. Cutting..
6) MOQ : 1 ton. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container.
7) FOB Port: Shanghai Port
7 Extrusion Production Lines (From 600 Tons to 3600 Tons)
6 Anodizing Production Lines
4 Powder Coating Production Lines
2 Anodizing and Electrophoresis Production Lines
Total Annual Output can reach 100,000 tons.
MetalPlus invested in an express extrusion machine with a 3600 ton extrusion force in 2007, enabling our factory to produce a heat sink with a maximum diameter of 600mm.
Shapes can also be customized based on customer requirements and the project specifications.
We specialize in a variety of aluminum extrusions for construction and industry. Depending on the client's needs, we can make moulds, extrude, provide surface treatment, and fabricate.
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device's temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
1) Standard: GB/75237-2004, Q/320281/PDWD-2008
2) Certification: ISO9001
3) OEM service offered
4) Material: Alloy 6063, 6061, etc.
Temper: T3, T4, T5, T6
5) Fabrication : 1. Milling; 2. Drilling; 3. Bending; 4. Cutting..
6) MOQ : 1 ton. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container.
7) FOB Port: Shanghai Port
7 Extrusion Production Lines (From 600 Tons to 3600 Tons)
6 Anodizing Production Lines
4 Powder Coating Production Lines
2 Anodizing and Electrophoresis Production Lines
Total Annual Output can reach 100,000 tons.
MetalPlus invested in an express extrusion machine with a 3600 ton extrusion force in 2007, enabling our factory to produce a heat sink with a maximum diameter of 600mm.
Shapes can also be customized based on customer requirements and the project specifications.
We specialize in a variety of aluminum extrusions for construction and industry. Depending on the client's needs, we can make moulds, extrude, provide surface treatment, and fabricate.