NEWS
Home » News » Industrial Aluminum Extrusion Profile processing method

Industrial Aluminum Extrusion Profile processing method

Views: 0     Author: Site Editor     Publish Time: 2021-06-18      Origin: Site

Work flow of aluminum extrusion press

1. Inspect whether the oil stress system is leaking and the atmospheric pressure is typical.

 

2. Inspect whether the conveyor belt, cooling down bed, as well as storage space table are damaged or damaged.

 

3. Verify the length of the aluminum account before stretching. At the predetermined stretch rate, that is, the main chuck relocating setting, the 6063T5 stretch rate is normally 0.5%-1%, and the 6061T6 stretch price is 0.8%-1.5%.

 

4. Validate the securing approach according to the form of the aluminum account. Hollow accounts with huge cross-sections can be stuffed with stretch pads, but attempt to guarantee adequate securing area.

 

5. When the aluminum account is cooled to below 50 levels, the account can be stretched.

 

6. When the account has both bending as well as twisting, the turning must be remedied initially and after that stretched.

Do a pull examination on the 2nd and also initial heels to confirm whether the predetermined stretch rate as well as securing technique are ideal. If it is not suitable, change the stretch rate suitably.

 

7. When the normal extending price still can not eliminate the bending, turning, or the geometric dimensions are not certified, the driver needs to be informed to quit the extrusion.

 

8. The accounts on the cooling table can't scrub versus each other, clash, and accumulate to prevent scratching.

Confirm the length of the industrial aluminum profile prior to extending. At the fixed stretch rate, that is, the primary chuck moving setting, the 6063T5 stretch rate is usually 0.5%-1%, and the 6061T6 stretch price is 0.8%-1.5%.

 

9.Hollow accounts with large cross-sections can be packed with stretch pads, yet try to make certain sufficient clamping area.

Do a pull examination on the 2nd and also very first heels to validate whether the predetermined stretch price and clamping approach are appropriate.

 

Precautions for aluminum extrusion die

1.The section of industrial aluminum profile itself is ever-changing, and the aluminum profile extrusion sector has developed to this day, aluminum alloy, the section of aluminum profile itself is ever-changing, and also it has important advantages such as tidy body and great strength. At existing, lots of sectors have actually embraced aluminum profile rather. Due to the special profile of some profiles, the design as well as manufacturing of the mold are difficult due to the special profile area.

 

2. Choose a suitable extruder for production. Prior to extrusion production, the dimension of the account area is identified according to the complexity of the profile area, the wall surface thickness as well as the extrusion coefficient to establish the tonnage of the extruder.

 

3.Reasonably choose the billet and heating temperature level, homogenize the billet, as well as purely manage the alloy composition of the extruded billet. When there are air, holes, loosened framework or facility fractures in the ingot, the abrupt launch of the air throughout the extrusion procedure is similar to "blasting", which makes the local working area of the mold all of a sudden unload and pack once again, forming a local substantial impact load, which will certainly impact the mold and mildew.

 

4. Using the mold adopts the strength from low to high to low. In the middle of the mold and mildew's use, since the efficiency of the mold is basically in a stable state, the toughness of use can be properly enhanced. In the later phase, the metal framework of the mold and mildew has started to wear away, as well as fatigue strength, stability, as well as toughness, have actually begun to come under a downward curve after long-term production as well as service. At this time, the use strength of the mold and mildew ought to be appropriately decreased till the mold and mildew are junked.

 

5. Strengthen the use as well as upkeep records of the mold and mildews in the extrusion production process, boost the monitoring records of each collection of molds, and also reinforce the use and upkeep documents of the mold and mildews in the extrusion production process to help with administration.

 

The area of the aluminum account itself is ever-changing, and also the aluminum profile extrusion sector has developed to this day, aluminum alloy, the section of the industrial aluminum profile itself is ever-changing, and also it has essential benefits such as a clean body and excellent toughness. At existing, many markets have embraced aluminum account instead. Due to the unique account of some accounts, the style and production of the mold are difficult due to the unique profile area. Prior to extrusion production, the dimension of the profile area is figured out according to the complexity of the account area, the wall surface thickness and also the extrusion coefficient to determine the tonnage of the extruder.


Come to our web to check out more about the aluminum industrial profile and aluminum for building and construction.


PRODUCT CATEGORY

Building and construction

ARTICLE CLASSIFICATION

Global Case

PRODUCT CATEGORY
ADDRESS: HUALU RD.5-2#,HUASHI TOWN,JIANGYIN CITY ,JIANGSU PROVINCE
TEL: 86-510-86215836
WHATSAPP: 13861643436
EMAIL: metalplus@hentec.com.cn
FOLLOW US

Home

Copyright © 2020 MetalPlus Industry Company. All rights reserved.  |  Supported  by  leadong.com